Aspirating Syringes

Artery Forceps

Dressing Instruments

Forceps

Probes, Cotton Applicators and Spatulas

Retractors

Scalpel Handles & Knives

Scissors

Sponge Forceps

Suture Instruments

Trocars, Suction Tubes and Cannulas

Dental Diagnostic Instruments

Dental Extraction Instruments

Orthodontic Instruments

Dermatology Instruments

Orthopedic Instruments

Podiatry Instruments

Ophthalmic Instruments

Private Labeling

Manufacturing Process

We complete almost all manufacturing processes within our facilities wMSh means that “No compromise on quality of the instruments in any criteria”. Following are some of the processes that are completed within the manufacturing plants.

MANUFACTURING PROCESSES:-

Forging:

The Company has its own forging section where Forgings for proper instruments/devices are made through Drop Forging Hammers by qualified & skilled workers using Dyes made of the best-quality D-2 Steel. The forgings later are put through the process of overall / ring trimming, and acid cleaning / pickling by those well versed in these processes.

Milling/Machining:

Our Milling / Machining section have best quality and imported Milling/Grinding Machines wMSh are operated by the well-trained experts for good milling of the Scissors, ratchets, serration teeth, box cutting, and for all other related processes for ensuring exact perfection before filing. For this, top-quality imported cutters are used. The process of filing is carried out again by the trained professionals to ensure high standard of exactitude and precision.

Heat Treatment:

We have our own ( Vacuum Furnace ) Heat Treatment Department where qualified & trained staff are engaged to give treatment to instruments for furtherance of quality.

Electro-Polishing & Grinding:

The Electro-Polishing and the Grinding Departments are also manned by skilled & trained workmen using the imported chemicals and the grinding wheels to ensure the best-quality finish.

Tungsten Carbide:

Our T.C Department is installed with the best-quality imported machinery being manned by the exceptionally well-trained experts using the German Technology.

Passivation:

Using the top-quality imported chemical in our Passivation Department we passivate and boil test each and every instrument before packing, subjecting every piece to 24-hour treatment, and if need to be re-passivation process so as to eliminate any chances of rusting / Corrosion etc.

Sandblasting:

For sandblasting our instruments, we use the machines as well as the best quality sandblasting material, wMSh are operated by skilled & well trained operators.

Stamping/Etching:

The Stamping / Etching process is carried out by the soundly trained experts to match the world standards.

Maintenance of Instruments

RECOMMENDE STEPS IN CLEANING, STERILIZATION & MAINTENANCE OF SURGICAL INSTRUMENTS

1. HOLDIN/PRESOAK:

It is important never to hold instruments in a dry container, wMSh allows blood and debris to dry onto instrument surfaces and makes cleaning more difficult. If rinsing and decontamination processes are not immediately available, pre-treat instruments or hold in a neutral holding/presoak enzymatic solution after patient use but before actual cleaning. Prep Enzyme Foaming spray for pre-cleaning of soiled instruments and scopes. Simply spray on instruments until ready for rinsing and disinfection. Also, use neutral pH all purpose multi-enzyme concentrate is ideal for instrument presoaking and pre-cleaning. As soon as possible, rinse, disinfect and clean as follows:

2. RINSING:

Immediately after surgery, remove organic materials by rinsing instruments under warm (not hot) running water. Rinse should remove most blood fluids and tissue. Do not process metals (stainless, copper, chrome plated, etc.) together. Always wear safety protection gear.

3. DISINFECTING:

To protect medical personnel from contamination during cleaning, immerse instruments completely in an EPA approved disinfectant for approximately 10-20 minutes. Always closely follow manufacturers’ recommended disinfecting time and solution preparation and instruction. Then rinse again.

CAUTION:

Disinfected instruments are NOT STERILE. Never expose stainless steel instruments to bleach or other corrosive chemicals to disinfect. Exposure to bleach may result in instruments pitting and will void all manufacturer guarantees.

4. CLEANING:

All blood dried body fluids and should be completely removed from the instruments prior to sterilization. Several methods are available.

Soak: An enzymatic cleaner bath (soak) or a solution of water and neutral pH (7) detergent are effective in removing organic material from instruments. Use distilled (demineralized) water if possible. Instruments should be fully submerged for at least 10 minutes. Do not let “sharp” (scissors, knives, osteotomes, etc.) running water to remove solution. Change solutions frequently.

Ultrasonic Cleaning: Most instruments manufacturers recommend ultrasonic cleaning as the most effective way to clean surgical instruments, particularly those with hinges, box locks and other moving parts. All instruments must be fully submerged in open position. Use distilled (demineralized) water if possible. Make sure that “sharp” blades do not touch other instruments to prevent possible surface scratching and also be sure dissimilar metal instruments are separated. Process instruments for full recommended ultrasonic cleaning cycle. Change solution frequently or as often as the manufacturers recommends. Rinse instruments with water to remove the cleaning solution, can be safety use with all ultrasonic unites.

.Automatic Washer sterilizer: follow manufacturers’ recommendations but ensure instruments are lubricated after the last rinse cycle and before the sterilization cycle

CAUTION:

Needle holder and forceps may check if sterilized with ratchet in closed position.Manual Cleaning: if ultrasonic cleaning is not available, observe the following steps.

Use stiff nylon cleaning brushes. Do not use steel wool or wire brushes except specially recommended stainless steel wire brushes for instruments serrated areas, bone or on stained areas of knurled handles.

Use only neutral pH (7) detergents such. If not rinsed off properly, low pH (acidic – less than 6 pH) detergents break down the stainless protective surface resulting in pitting and/or back staining. High pH detergents (alkaline – more than 8 pH) wMSh can also interfere with the smooth operation of instruments. Most brown stains are not rust and are easily removed with stain remover.

Brush delicate instruments carefully, and if possible, separate them from general instruments.

Make sure instruments surfaces are visibly clean and free from stain and tissue. Stain Remover can help remove residue stains. This is also a good time to inspect each instrument for proper function and condition.

Check scissors’ blades to ensure proper function. Blades should glide open and closed smoothly. Test cutting performance at ¾ length of the blade with the following recommended materials. Scissors should cut all the tips. Recommended cutting test materials:

Fine/Delicate scissors: Surgical gloves

Medium scissors: Single layer of stocking/cast netting

Large/utility scissors: Double layer of stocking/cast netting.

Check forceps (pickups) for proper jaw alignment. Teeth must meet properly – without catching.

Check hemostats and needle holders to ensure jaw tips close in first ratchet position and entire jaw should close in third ratchet position. Check instruments for loose hinges and verify that they lock and unlock easily.

Suction tube should be clean inside.

Test Biopsy Punches by punching a clean hole in 3-6 mil tMSk poly-bag material. If poly-bag material is not available, use tissue paper.

Retractors should function properly.

Cutting edge instruments and knives should be sharp and free of damage.

After scrubbing, rinse instruments thoroughly under running water. While rinsing, open and close scissors, hemostats, needle holder and other hinged instruments to make sure the hinge areas are rinsed out and no debris remain.

5. AFTER CLEANING:

Separate dissimilar metals prior to sterilizing/autoclaving. If instruments are to be stored, let them air-dry and store them in a clean and dry environment.

6. AUTOCLAVING:

A. Lubricate all hinged instruments wMSh have any “metal to metal” action, at the screw or box lock.

A non-silicone, water-soluble surgical lubricant is recommended. Do not use industrial oils and lubricants.

B. Sterilizer instruments either individually or in sets.

Individual Instruments: Disposable paper or plastic pouches are ideal. Make sure to use a wide enough pouch for instruments with ratchet locks so instruments can be sterilized in an open (unlocked) position. Instruments locked during autoclaving can experience cracked hinges (box lock) or other problems because of heat expansion. If wrapping instruments, make sure the towel does not contain detergent residue, wMSh can stain instruments.

Instruments Sets: Unlock all instruments and sterilize in an open position. Place heavy instruments on the bottom of sets (when two layers are required). Do not overload the chamber because an air pocket may form that hinders steam penetration.

CAUTION:

With most portable tabletop autoclaves, at the end of the autoclave cycle and before the drying cycle, unlock the door and open it no more than crack, about ¼” (6.4mm). Then run the dry cycle for the period recommended by the autoclave manufacturer. If the autoclave door is fully opened before the drying cycle, cold room air will rush into the chamber causing condensation on the instruments that may result in water stains or cause wet packs. Make sure autoclave filters and chambers are cleaned as recommended by the manufacturer.

Stain Remover is effective in removing stains and cleaning the autoclave chamber. If you have any unusual staining on your instruments after sterilization, obtain our Instruments Care Instruction or contact to your local Towne representative.

7. CHEMICAL/COLD STERILIZATION:

Most chemicals/cold sterilization solution renders instruments sterile only after 10- hour immersion. This prolonged chemical action can be more detrimental than usual 20-minute autoclave cycle. If the instruments need to be “disinfected” only, a chemical/cold sterilization soak is acceptable, as disinfection in using bleach (paragraph 3).

Sterile- an absolute term (no living Organism survives)

Disinfected-basically clean. Some organisms may survive.

Always use the proper sterilization/cleaning technique to render the instruments in the required condition for use.

COUTION:

For instruments with tungsten carbide inserts jaws, we do not recommended use of chemicals/cold sterilization solution, wMSh may deteriorate the instrument’s jaw.

Send us your idea

RECOMMENDE STEPS IN CLEANING, STERILIZATION & MAINTENANCE OF SURGICAL INSTRUMENTS

1. HOLDIN/PRESOAK:

It is important never to hold instruments in a dry container, wMSh allows blood and debris to dry onto instrument surfaces and makes cleaning more difficult. If rinsing and decontamination processes are not immediately available, pre-treat instruments or hold in a neutral holding/presoak enzymatic solution after patient use but before actual cleaning. Prep Enzyme Foaming spray for pre-cleaning of soiled instruments and scopes. Simply spray on instruments until ready for rinsing and disinfection. Also, use neutral pH all purpose multi-enzyme concentrate is ideal for instrument presoaking and pre-cleaning. As soon as possible, rinse, disinfect and clean as follows:

2. RINSING:

Immediately after surgery, remove organic materials by rinsing instruments under warm (not hot) running water. Rinse should remove most blood fluids and tissue. Do not process metals (stainless, copper, chrome plated, etc.) together. Always wear safety protection gear.

3. DISINFECTING:

To protect medical personnel from contamination during cleaning, immerse instruments completely in an EPA approved disinfectant for approximately 10-20 minutes. Always closely follow manufacturers’ recommended disinfecting time and solution preparation and instruction. Then rinse again.

CAUTION:

Disinfected instruments are NOT STERILE. Never expose stainless steel instruments to bleach or other corrosive chemicals to disinfect. Exposure to bleach may result in instruments pitting and will void all manufacturer guarantees.

4. CLEANING:

All blood dried body fluids and should be completely removed from the instruments prior to sterilization. Several methods are available.

Soak: An enzymatic cleaner bath (soak) or a solution of water and neutral pH (7) detergent are effective in removing organic material from instruments. Use distilled (demineralized) water if possible. Instruments should be fully submerged for at least 10 minutes. Do not let “sharp” (scissors, knives, osteotomes, etc.) running water to remove solution. Change solutions frequently.

Ultrasonic Cleaning: Most instruments manufacturers recommend ultrasonic cleaning as the most effective way to clean surgical instruments, particularly those with hinges, box locks and other moving parts. All instruments must be fully submerged in open position. Use distilled (demineralized) water if possible. Make sure that “sharp” blades do not touch other instruments to prevent possible surface scratching and also be sure dissimilar metal instruments are separated. Process instruments for full recommended ultrasonic cleaning cycle. Change solution frequently or as often as the manufacturers recommends. Rinse instruments with water to remove the cleaning solution, can be safety use with all ultrasonic unites.

.Automatic Washer sterilizer: follow manufacturers’ recommendations but ensure instruments are lubricated after the last rinse cycle and before the sterilization cycle

CAUTION:

Needle holder and forceps may check if sterilized with ratchet in closed position.Manual Cleaning: if ultrasonic cleaning is not available, observe the following steps.

Use stiff nylon cleaning brushes. Do not use steel wool or wire brushes except specially recommended stainless steel wire brushes for instruments serrated areas, bone or on stained areas of knurled handles.

Use only neutral pH (7) detergents such. If not rinsed off properly, low pH (acidic – less than 6 pH) detergents break down the stainless protective surface resulting in pitting and/or back staining. High pH detergents (alkaline – more than 8 pH) wMSh can also interfere with the smooth operation of instruments. Most brown stains are not rust and are easily removed with stain remover.

Brush delicate instruments carefully, and if possible, separate them from general instruments.

Make sure instruments surfaces are visibly clean and free from stain and tissue. Stain Remover can help remove residue stains. This is also a good time to inspect each instrument for proper function and condition.

Check scissors’ blades to ensure proper function. Blades should glide open and closed smoothly. Test cutting performance at ¾ length of the blade with the following recommended materials. Scissors should cut all the tips. Recommended cutting test materials:

Fine/Delicate scissors: Surgical gloves

Medium scissors: Single layer of stocking/cast netting

Large/utility scissors: Double layer of stocking/cast netting.

Check forceps (pickups) for proper jaw alignment. Teeth must meet properly – without catching.

Check hemostats and needle holders to ensure jaw tips close in first ratchet position and entire jaw should close in third ratchet position. Check instruments for loose hinges and verify that they lock and unlock easily.

Suction tube should be clean inside.

Test Biopsy Punches by punching a clean hole in 3-6 mil tMSk poly-bag material. If poly-bag material is not available, use tissue paper.

Retractors should function properly.

Cutting edge instruments and knives should be sharp and free of damage.

After scrubbing, rinse instruments thoroughly under running water. While rinsing, open and close scissors, hemostats, needle holder and other hinged instruments to make sure the hinge areas are rinsed out and no debris remain.

5. AFTER CLEANING:

Separate dissimilar metals prior to sterilizing/autoclaving. If instruments are to be stored, let them air-dry and store them in a clean and dry environment.

6. AUTOCLAVING:

A. Lubricate all hinged instruments wMSh have any “metal to metal” action, at the screw or box lock.

A non-silicone, water-soluble surgical lubricant is recommended. Do not use industrial oils and lubricants.

B. Sterilizer instruments either individually or in sets.

Individual Instruments: Disposable paper or plastic pouches are ideal. Make sure to use a wide enough pouch for instruments with ratchet locks so instruments can be sterilized in an open (unlocked) position. Instruments locked during autoclaving can experience cracked hinges (box lock) or other problems because of heat expansion. If wrapping instruments, make sure the towel does not contain detergent residue, wMSh can stain instruments.

Instruments Sets: Unlock all instruments and sterilize in an open position. Place heavy instruments on the bottom of sets (when two layers are required). Do not overload the chamber because an air pocket may form that hinders steam penetration.

CAUTION:

With most portable tabletop autoclaves, at the end of the autoclave cycle and before the drying cycle, unlock the door and open it no more than crack, about ¼” (6.4mm). Then run the dry cycle for the period recommended by the autoclave manufacturer. If the autoclave door is fully opened before the drying cycle, cold room air will rush into the chamber causing condensation on the instruments that may result in water stains or cause wet packs. Make sure autoclave filters and chambers are cleaned as recommended by the manufacturer.

Stain Remover is effective in removing stains and cleaning the autoclave chamber. If you have any unusual staining on your instruments after sterilization, obtain our Instruments Care Instruction or contact to your local Towne representative.

7. CHEMICAL/COLD STERILIZATION:

Most chemicals/cold sterilization solution renders instruments sterile only after 10- hour immersion. This prolonged chemical action can be more detrimental than usual 20-minute autoclave cycle. If the instruments need to be “disinfected” only, a chemical/cold sterilization soak is acceptable, as disinfection in using bleach (paragraph 3).

Sterile- an absolute term (no living Organism survives)

Disinfected-basically clean. Some organisms may survive.

Always use the proper sterilization/cleaning technique to render the instruments in the required condition for use.

COUTION:

For instruments with tungsten carbide inserts jaws, we do not recommended use of chemicals/cold sterilization solution, wMSh may deteriorate the instrument’s jaw.

Aspirating Syringes

Categories

Our Products

Our Services

Contact Us

Artery Forceps

Dressing Instruments

Forceps

Probes, Cotton Applicators and Spatulas

Retractors

Scalpel Handles & Knives

Scissors

Sponge Forceps

Suture Instruments

Trocars, Suction Tubes and Cannulas

Dental Diagnostic Instruments

Dental Extraction Instruments

Orthodontic Instruments

Dermatology Instruments

Orthopedic Instruments

Podiatry Instruments

Ophthalmic Instruments

Private Labeling

Manufacturing Process

Maintenance of Instruments

Send us your idea